For the sake of convenience, people nowadays have installed faucets specifically for kitchen use in the kitchen to wash kitchen utensils and daily food, etc. The kitchen faucet provides great convenience for our daily life, but many people encounter the problem of small water flow from the kitchen faucet during the use of the kitchen faucet. The small water flow from the kitchen faucet has a great impact on everyone's normal life, and everyone does not know how to solve this problem. The following editor will introduce in detail the reasons and solutions for the small water flow from the kitchen faucet.

Reasons for small water flow from kitchen faucets

1. Water quality problems. The kitchen faucet is clogged due to impurities such as sand, rust, etc. in the water. You can unscrew the water outlet of the kitchen faucet for inspection, and drain the water while unscrewing the filter head. If the water flow returns to normal, it means that the problem lies in the filter. Then gently tap the removed faucet filter in the pool, and large particles of solid impurities such as sand will fall naturally. Remember not to pick it with your hands, otherwise the sand will be pressed into the filter and stuck. In order to ensure that it can be cleaned in place, the filter and gasket inside can be removed and rinsed, and the stains in the middle of the filter hole can be pierced with a needle tip. After cleaning, reinstall them. These can be learned from the kitchen faucet manufacturer. In many cases, if you are a wholesaler of kitchen faucets, you can go to the kitchen faucet manufacturer to practice.

2. There is another situation introduced by the kitchen faucet manufacturer. If it is caused by large pieces of foreign matter, this situation is relatively rare, but it is inevitable, so I will also mention it here. It is actually very simple. You only need to prepare a wrench for disassembling the faucet. Use a wrench to open the interface under the basin. In fact, most faucets can be twisted open by hand with great force. Remove the kitchen faucet. Of course, the filter head at the front section must also be removed and put aside. Turn the faucet upside down and fill it with a bottle of clean water. If the water flowing out of the back end is not smooth, it proves that there is a foreign object in the faucet pipe. You can also put it under flushing water to clean it to ensure that it can be cleaned properly. Then you can put it back. Note that when you put it back, you must also check whether the connection is tightened to avoid water leakage.

3. The water outflow of the kitchen faucet is bifurcated or the water volume is reduced. There is no bubble phenomenon. The filter screen of the bubbler is fouled or blocked by debris (the bubbler is a complete set of the faucet water outlet. Its function is to foam the water flowing out of the kitchen faucet through the kitchen faucet). Treatment method: Remove the water outlet and clean the filter screen.

4. The water output of the shower is small, the water output is bifurcated, the water pressure is low, or there is debris blocking the shower head. Solution: Unscrew the shower head and take out the rubber gasket with filter at the shower head water inlet or clean the shower head spray.

5. The water output of the basin faucet and kitchen faucet is small and does not bubble. The low water pressure causes the bubbler to fail to produce bubbles. Solution: Remove the kitchen faucet spout and replace the bubbler.