1. Preparation stage for shower faucet installation

(1) Investigate the actual environment, select the shower faucet of the right size, plan the holding position, and prepare materials such as adjustable wrenches, pipe pliers, and raw tape.

(2) Check whether the quality and model of the shower faucet meet the requirements, and check the number of accessories.

2. Details of shower faucet installation

(1) Before installation, turn off the water source, clean the water distribution pipe and keep it clean.

(2) Lock the decorative cover into the water inlet elbow, then wrap the tooth with raw tape and lock it into the wall pipe. Rotate the decorative cover close to the wall. Follow this process to continue installing the hot and cold water inlet elbows.

(3) When adjusting the hot and cold water inlet elbows, rotate the angle to the horizontal and the hole spacing to the same as the hot and cold water inlet holes of the main body. The actual details need to be adjusted by yourself. Tighten the nut with an adjustable wrench.

(4) Connect the nut of the hose group to the bottom of the main body and tighten it. Take precautions against leakage.

(5) Lock the shower head into the nut at the other end of the hose and tighten it according to the instructions in the installation manual.

(6) Mark the location of the installation hook on the wall, drill a hole at the marked location with an electric drill, insert the plastic expansion tube into the hole, and tighten the hook with a screw.

(7) When turning on the water source, first check whether it has any leakage. If the test is normal, the installation process is considered complete.