1. Do not use excessive force to turn on and off the basin faucet, just turn it gently. Even for traditional basin faucets, you don't need to use a lot of force to tighten it, especially don't use the handle as a handrail for support or use.

2. The metal hose of the basin faucet shower head should be kept in a naturally stretched state, and do not coil it around the basin faucet when not in use. At the same time, when using or not in use, pay attention to the joint between the hose and the valve body so as not to form a dead angle to avoid breaking or damaging the hose.

3. When the water pressure is not less than 0.02mpa (i.e. 0.2kgf/cm²), after using it for a period of time, if the water output is found to be reduced or even the water heater is turned off, you can gently unscrew the screen cover at the water outlet of the faucet to remove impurities, and it can generally be restored to its original state.

4. Ask experienced and qualified professionals to carry out the construction and installation. When installing the basin faucet, the basin faucet should be avoided from hitting hard objects as much as possible, and cement, glue, etc. should not be left on the surface to avoid damaging the gloss of the surface coating. It is important to remove the debris in the pipe before installing the basin faucet.

Basins, like faucets, are commonly used washing utensils in bathrooms. At present, most of the basins on the market are ceramic basins. During the cleaning and maintenance of such basins, the above issues need to be paid attention to.