1. During installation, all kinds of impurities in the pipe should be thoroughly removed. This can avoid valve core damage, obstruction, blockage and leakage. At the same time, the surface should be cleaned so that no building material residues remain.

2. When using any type of faucet product, there is no need to use excessive force when switching on and off. Just twist or turn it gently. Even for traditional faucets, there is no need to spend a lot of effort to tighten it. In particular, do not use the handle as a handrail for support or use. Products with screen covers at the water outlet should be disassembled and rinsed to remove impurities after using for a period of time. Products equipped with hoses should pay attention to keeping the hoses in a natural stretch state to avoid breaking.

3. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretch state. Do not coil it around the faucet when not in use. At the same time, when in use or not in use, pay attention to the joint between the hose and the valve body not forming a dead angle to avoid breaking or damaging the hose.

4. The faucet that has been used for a short time sometimes has problems such as incomplete closure, leakage, loose handles, loose connection ports and water leakage. Under normal circumstances, consumers can solve them by themselves.

5. Precautions for cleaning faucets:

(1) Do not use hard objects such as steel wool to wipe the surface of the faucet, because steel wool is very hard and can easily scratch the surface of the faucet.

(2) It is best to use a neutral detergent for cleaning. Cleaners with strong acidity and alkalinity are not suitable for cleaning faucets.

(3) After cleaning the faucet, you should use a dry, lint-free towel (the same applies to glass cleaning) to wipe off the remaining moisture on the surface to avoid scale.