Concealed shower refers to the installation of the water supply pipe of the bathroom shower pre-buried in the bathroom wall. If the shower is directly installed on the bathroom wall after the decoration is completed, it is called an exposed shower.

Notes:

1. Notes on concealed shower:

The concealed water outlet on the wall should be level with the tile surface, and the internal concealed water pipe should be perpendicular to the wall. After the shower is installed, it should be at a 90-degree angle to the wall. In addition, water pressure regulation is also a key. Under normal circumstances, water pressure within 1.5 kg is suitable for shower use. Excessive water pressure will cause the shower to be violent, and too low water pressure will cause the shower to not work normally.

2. Notes on exposed shower:

The exposed lifting rod shower is generally defined by the shower outlet, and the distance is preferably 2 meters. It should be noted that these data are only average data. When actually installed, they should be adjusted accordingly according to the user's height. The concealed water pipes of the exposed shower switch are hot on the left and cold on the right, with a center spacing of 150cm. The concealed water outlet on the wall should be level with the tile surface, and the internal concealed water pipes should be perpendicular to the wall. After the shower is installed, it should be at a 90-degree angle to the wall.