How to clean and maintain the shower faucet? I believe everyone wants to know that some friends' shower faucets are as good as new after a long time of use, while others are dull and lifeless. This is caused by not paying attention to cleaning and maintenance. So how to clean and maintain the shower faucet?

1. Cleaning

Avoid letting water evaporate on the metal surface. Otherwise, scale will form on the metal surface after evaporation. The ideal cleaning technique is to rinse the faucet with clean water, then wipe all the water on the metal surface of the faucet with a soft cotton cloth, wipe gently, and do not rub vigorously. It can make the faucet shiny and bright.

If a lot of cleaning work is required, general stains can be cleaned with toothpaste or special detergents, preferably mild liquid glass cleaners. Or acid-free, non-abrasive soft liquids and completely dissolved powders, non-frictional solution polishes can remove the rough mask and deposits on the faucet. Do not use any frictional cleaners, as well as any acid-containing cleaners, polishing friction agents or rough cleaners. After cleaning, please use clean water to remove all detergents and wipe dry with a soft cotton cloth.

2. Maintenance

For the maintenance of shower faucets, it is important to open and close them slowly during use, so that scale will not accumulate and the purpose of maintenance is achieved at the same time. The double-handled faucet cannot be closed too tightly, otherwise the water stopper will fall off, causing the water to not be closed or stopped. So pay attention to opening and closing during use.

When the shower faucet encounters stains and scale during cleaning, you must choose the correct decontamination agent, and do not use steel wool when cleaning to avoid scratches on the surface of the shower faucet, which not only affects the aesthetics but also shortens the service life, and also fails to achieve the purpose of maintenance.

Wall-mounted shower faucets are generally more prominent, so be careful not to bump or press them when taking and placing items. In particular, the surface electroplating of some brands of faucets is quite thick and cannot withstand hard objects. Therefore, when using, try to avoid contact with hard objects such as rings to avoid fatal injuries.

If the water output is reduced when the water pressure is not less than 0.02mpa, it may be that the faucet is blocked. The solution is to use a wrench to gently unscrew the faucet screen cover at the water outlet of the faucet, clean out the impurities and then carefully install it again. Generally, it can be restored to its original state.